Workplace Electrical Safety – What An Electrician Suggests

The modern-day workplace runs on electricity. Everything from computers, printers, air conditioning, and many more run on electricity. The gist of it the balancing act between a man and his machines, especially the electrically-operated ones. Electrical safety is a must at home and in the workplace. With this in mind, it is necessary to hire an electrician to uphold electrical safety standards at all times, particularly in workplaces where many people are exposed to possible dangers of electrocution and other risks.

What is the role of an electrician in any workplace?

Primarily, an electrician Wilmington is responsible for the electrical safety of any workplace. It’s to the benefit of anyone that the company hire a credible electrical contractor for setting up the electrical system in office spaces and entire buildings. This is done primarily for the purpose of saving people’s lives and keeping them away from danger in the first place. It’s also meant to secure the investment of companies in the form of equipment. What are the possible outcomes of electrical failure? There are numerous outcomes that can be drawn out of electrical failures. First and foremost, there’s the failure of machines i.e. computers and other electrical appliances found in the office. Second, electrical failures can result in incidents involving people or fatalities in worst-case scenarios. Lastly, electrical failures can lead to fires resulting from short circuits and other causes. How can electrical safety be applied in the workplace? As you may have already known, the risks of human fatality is high given circumstances and exposure to electricity and machines. However, there are also numerous ways on how to prevent electrically-caused accidents in the workplace by applying the following practices:

1. Using proper cable connectors instead of DIY or makeshift connections.
2. Electrical installations, especially involving electrical outlets, must be done by a licensed electrician.
3. Electrical outlets must not be overloaded.
4. Using only electrical equipment that is suitable for use.
5. Any electrical equipment issues must be repaired by a commercial or residential electrician immediately.

Further safety measures include the addition of RCD (residual current device) or GFCI (ground fault interrupter) devices. These devices prevent prolonged exposure to electric shock. This greatly prevents any casualties resulting from electrocution. In general, electrocution can be fatal. If the electrical current from the source is not cut, the person on the receiving end could potentially die after a few seconds of electrocution. However, GFCI or RCD devices limit the exposure to mere milliseconds. Instead of being able to feel the full blast of electricity, the person involved will only feel a slight pinch. Again, these devices must only be installed by licensed electricians. Devices that control or dictate the electrical safety of a home or workplace must only be installed and maintained by trained professionals. This is to avoid any issues or lapses in electrical safety. Professionals like WHS Electricians LLC are the likely people to handle these kind of tasks. Not only are they experienced, but the also have all the necessary equipment to make installation, repair, or upgrades easy.

Need a reputable electrician for electrical upgrades and repairs? Call WHS Electricians LLC today!

WHS Electricians LLC Wilmington, NC 28409 910-408-5448 http://wilmingtonelectricianpro.com/

http://wilmingtonelectricianpro.com/electrician-on-electrical-safety/

Electrical Safety Basics – Surge Protection

Electricity powers every single home that’s why it is necessary to have safety measures in place. While electricity is useful in our daily lives, it can also be potentially dangerous or even fatal. Electrical safety is applied to every new home built. This includes adding surge protection and other useful features that make up the residential electrical system. However, not all homes have the necessary electrical safety measures in place. Older homes, in particular, don’t have surge protection or GFCI outlets that make electrical usage a lot safer.

What you should know about surge protection and electrical safety

1. It is not safe to work with exposed conductors with 50 volts or higher.
2. All electrical equipment must be properly connected, grounded, and maintained.
3. Extension cords are only used for temporary applications and not for permanent wiring.
4. Surge protectors with built-in circuit breakers can be used long-term.
5. Electrical equipment that draws high electrical current must plug directly into wall sockets.
6. Unless qualified, never attempt to service electrical panels on your own.
7. Operating electrical equipment in wet areas is an electrical hazard.

GFCI outlets and surge protection in Wilmington are among the common ways on how you could ensure electrical safety in your household. There are other ways that can help in reducing the number of electrical incidents in your home. With today’s modern electrical systems in place, it is unlikely for people to get hurt while operating electrical equipment. However, there is still a chance that the unfortunate may happen. On the other hand, the likelihood of incidents relating to electrical shock and fires can be greatly reduced with the right measures. If you live in an older home, you have more reason to implement these electrical safety features. The best way to do this is to hire an electrician. Why hire an electrician? An electrical professional can tell you what upgrades will be necessary for your home. There are plenty out in the market but not all of them are necessarily needed for your home. Installing GFCI outlets is one good place to start.

What can GFCI outlets do?

Basically, what a GFCI outlet does is greatly reduce the electrical shock that a person would receive. In the event where a person is electrocuted, the GFCI outlet would automatically kick in to prevent any serious injuries. In real-time, this happens in just a fraction of a second. When you put it into a real-world scenario, you will barely feel an electric shock after plugging in a wet plug into a wall outlet. However, GFCI outlets need to be installed by a professional electrician. This is basically another preventive measure that will avert any electrical issues later on. Having electrical work done by a non-professional is not recommended. It is highly advised to hire only a professional electrician when having electrical work done at home. Whether it is simple repairs, upgrades, or electrical maintenance that you need, having it done by a registered electrician will be a lot better.

Need a reputable electrician for electrical upgrades and repairs? Call WHS Electricians LLC today!

WHS Electricians LLC Wilmington, NC 28409 910-408-5448 http://wilmingtonelectricianpro.com/

http://wilmingtonelectricianpro.com/electrical-surge-protection/